Ready
KEBA charging stations are Z.E. READY, being certified by Renault
Ready
KEBA charging stations are certified by Nissan
VDE
KEBA charging stations are certified by technical-scientific association VDE
DC Leakage detection
This charging station is equipped with integrated DC fault current sensor, which protects from shocks and improves the safety of electric grid
IP 54
KEBA housing cover is made from reliable, waterproof plastic, which protects it from moisture, dust and all weather conditions
KeContact P30 b-series Type 1
Type 1
This charging station can charge electric vehicles with type 1 connector
4m
This charging station comes with built-in cable 4 meters long
Key switch
RFID
KeContact P30 b-series Type 1
type1-1.jpg
type1-2.jpg

KeContact P30 b-series Type 1

Charging station with integrated Type 1 cable, recommended for private or semi-public places

  • Power: up to 4.6 kW
  • Size: 25 cm x 40 cm
  • Cable 4 meters long
  • Suitable for all Type 1 electric vehicles
  • Charges 2-3 times faster, than regular domestic socket
  • Adjustable charging power supply
  • DC leakage detection
  • Quality certificates: Renault ZE Ready, Nissan EV ready, VDE
  • Recommended for installation at home or semi-public places, where Type 1 EVs usually charge
Price:1 180
Additional options:
RFID
Key
Amount:

Final Price:

1 180

Advantages of KeContact b-series

KEBA KeContact P30 b-series, Type 1 has integrated cable. This makes charging very convenient for Type 1 EVs. Authorization with RFID cards or key switch helps to restrict the access in public or semi-public areas.

Charge time

KeContact b-series Type 1 can charge electric vehicles with 30 km per hour (up to 4.6 kW), depending on car's on-board charger. Only Type 1 EVs can charge with this model.. Mostly, it takes 5-6 hours to charge such cars as Nissan Leaf, Kia Soul EV, Renault Fluence.

Safety and protection

KEBA b-series is certified by Nissan (EV Ready) and Renault (ZE Ready). It is equipped with integrated DC fault current sensor, which protects from shocks and improves the safety of electric grid. KEBA housing cover is made from reliable, waterproof plastic, which protects it from moisture, dust and all weather conditions.

Optimal use

KEBA KeContact P30 b-series Type 1 is suitable for private use at home or in semi-public places where Type 1 EVs usually charge. Access to the charging station can be restricted with RFID cards or the key.

Chargers reliability

What is RFID?

KeContact P30 is equipped with RFID sensor and can be used for touchless authorization of a user with MIFARE cards or tags according to ISO14443. It can be used by EV fleet owners or employees charging at work or in cases when the access to the charging station has to be restricted.

Key- switch

The key switch is used for users authorization, restricting the access to the charging station. Thus, only the key holders are able to turn on/off the power supply of the charging station.

Suiatble for

Electric cars100% electric

Citroën C-Zero

Citroën Berlingo Electric L1

Ford Focus Electric

Kia Soul EV

Mitsubishi MiEV

Nissan Leaf

Nissan e-NV200

Opel Ampera

Peugeot iOn

Peugeot Partner Electric

Renault Fluence Z.E. (Typ 1)

Renault Kangoo Z.E. (Typ 1)

Plug-in hybridsPlug-in hybrids

Chevrolet Volt

Fisker Karma

Mitsubishi Outlander Plug-in Hybrid

Toyota Prius Plug-in Hybrid

Comparison chargers

- Included - Available as an option - Not available

E – SERIES

Single phase up to 20A (4.6kW). CE marking.

B – SERIES

Three phase up to 32A (22kW). VDE marking.

C – SERIES

Three phase up to 32A (22kW). VDE marking.

X – SERIES

Three phase up to 32A (22kW). VDE marking.
VDE certified
Certifications: Renault ZE Ready, Nissan EV Ready
Cable, Type 1
Cable, Type 2
Single phase up to 20A (4.6kW)
Three phase up to 32A (22kW)
10A, 13A, 16A, 20A
25A, 32A
DC leakage detection
MID certified meter
GSM interface
Key switch authorization
RFID authentication
Customizing/branding stand
Charging power 4,6 kW Nominal current (configurable connection values) 10A, 13A, 16A, 20A, 25A or 30/32A (individual setup)
Mains voltage 220V Size 240 х 495 х 163 mm (H,W,D)
Weight 4.8 kg Colour Light grey (RAL7035) & black (RAL9005)
Installation Charging station can be installed on a wall or on a stand, which can be bought as an option Plug type Type 1 (in acc. with ICE 62196-2)
Protection IP54, waterproof, suitable for outdoor use Safety Integrated DC fault current sensor (B-type RCD)
Operating temperature, relative humidity -25°C to +40°C, max. 95%
Standards & directives Directives: 2004/108/EG, 2006/95/EG, 1999/5/EC R&TTE, 2011/65/EU | European standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, E DIN EN 61439-7, EN 61000-6-1, EN 61000-6-3, EN 50581:2012 (RoHS-RL) RFID: EN 301 489-1, EN 301 489-3, EN

What should you keep in mind before installing a charging station

KEBA chargers KeContact with up to 22 kW power require corresponding power being supplied at the place of instalment. Please be aware, that some additional setup might be needed.

KeContact x-,c-, and b-series type 2 chargers are equipped with DC fault current sensors, which not only reduces further costs of instalment expensive B-type RCD, but also saves from shock or grid failure risks.

When deciding on placing of a charging point make sure it is sutable for connecting of EVs with available cables. Station has to be located in such way, not to make a barrier while charging.

Quick overview of requirements for instalation of charging stations

The charging station is set to 10 amps in the delivery state. Set the maximum current using the DIP switches to match the installed line circuit breaker. Minimum cross-section (depending on the cable and the laying system): 5 x 2.5 mm2 (16 A nominal current); 5 x 6.0 mm2 (32 A nominal current)

Every charging station must be connected via its own RCD. No other circuits may be connected to this RCD.

Installation, commissioning and maintenance of the charging station must be performed by correctly trained, qualified and authorized electricians who are fully responsible for the compliance with existing standards and installation regulations.

We offer turn-key installation of charging stations.

Installation costs differ, depending on the way of mounting, distance from grid, the need for cabling, power of connection.

Installation and commissioning of the wallbox KeContact P20 / P30